Achieva V6-3100 3.1L MFI VIN M (1994)
Rocker Arms
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Valve rocker covers.
3. Rocker arm nuts.
^
Keep components separated so they may be installed in the same location.
4. Rocker arm pivot ball(s).
5. Rocker arm(s).
6. Pushrods.
IMPORTANT
^
Place pushrods in order so they can be installed in their original position.
INSTALL OR CONNECT
1. Pushrods.
^
Install pushrods in their original location.
^
Coat the ends of the pushrods with prelube GM P/N 1052356.
^
Intake valve push rods are painted with two yellow stripes and measure 144.18 mm (5.68 inches) long.
^
Exhaust valve push rods are painted with two green stripes and measure 152.51 mm (6.0 inches) long.
^
Make sure pushrods seat in lifter.
2. Rocker arms.
3. Rocker arm pivot balls.
IMPORTANT
^
Coat bearing surfaces of rocker arms and pivot balls with camshaft and lifter prelube GM P/N 1052365 (or equivalent).
4. Rocker arm nut(s).
TIGHTEN
^
Nuts to 24 Nm (18 lb. ft.).
5. Valve rocker covers.
6. Negative battery cable.