Achieva V6-3100 3.1L MFI VIN M (1994)
4. Assemble the piston, the connecting rod, and the J 24086-6A adapter as shown. Insert the piston and connecting rod assembly into the J 24086-10
fixture support assembly.
NOTICE: After the J 24086-9 installation pin bottoms on the J 24086-10 fixture support assembly, do not exceed a pressure of 35,000 kPa
(5,000 psi), or damage to the connecting rod press may result.
5. Install the J 24086-105 (2) onto the piston pin. Position the J 24086-9 (1) though the J 24086-10 fixture support assembly and onto the J
24086-105 (2).
6. Press the J 24086-9 (1) installation pin until it bottoms on the J 24086-10 fixture support assembly.
7. Reinstall the piston rings onto the new piston.
