Achieva V6-3100 3.1L MFI VIN M (1994)
Wheel Bearing: Service and Repair
Hub & Bearing Replace - Front
Front Hub and Bearing Assembly
Figure 9
Remove or Disconnect
Tools Required:
J 28733-A Front Hub Spindle Remover.
1. Drive axle.
2. Brake caliper bolts, and support caliper.
3. Rotor.
4. Hub and bearing assembly.
5. Hub and bearing assembly from steering knuckle.
Install or Connect
1. Clean hub from rust and debris.
2. Hub and bearing assembly to steering knuckle. Tighten hub and bearing assembly bolts to 95 Nm (70 ft. lbs.).
3. Hub and bearing assembly bolts.
4. Rotor.
5. Brake caliper and bolts.
6. Drive axle.
7. Check from wheel alignment.
