Achieva V6-3300 3.3L (1992)
Trim Panel: Service and Repair
Door Jamb Switch
Center Pillar
Door jamb switch assemblies consist of a plunger collar, threaded retainer and terminals. They are installed in the rear hinge pillars. When the door of
the vehicle is closed, the plunger is depressed which creates an open in the ground circuit. When the door is opened, the plunger is released and
completes the circuit to ground. When a new jamb switch is installed and the door is closed the first time, the plunger is forced into the sleeve and
automatically adjusts the jamb switch for that particular door. If a jamb switch fails, it should not be readjusted by hand. A new jamb switch should be
installed.
Remove or Disconnect