Alero L4-144 2.4L DOHC VIN T SFI (2000)
Rear Bumper Reinforcement: Service and Repair
Rear Bumper Impact Bar Replacement
Removal Procedure
1. Remove the fascia.
2. Remove the energy absorber.
3. Disconnect the wiring harness from the impact bar.
4. Remove the impact bar retaining nuts (3) (2).
5. Remove the impact bar (1) from the vehicle.
Installation Procedure
1. Install the impact bar (1) to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the impact bar (3) retaining nuts.
Tighten the nuts to 25 N.m (18 lb ft).
3. Install the energy absorber.
4. Install the fascia.