Alero L4-144 2.4L DOHC VIN T SFI (2000)
Front Door Striker: Service and Repair
Door Striker Replacement
Removal Procedure
1. Remove the door lock striker bolts (3). (Rear door sedan is shown in the diagram. Other doors are similar).
2. Remove the door lock striker (1).
3. Remove the door lock striker spacer (2,4).
Installation Procedure
Notice: Striker alignment is a crucial part of door latch operation. Do not use the door striker to adjust the door to the vehicle. Failure to properly
adjust the striker can result in damage to the door latch and the striker.
1. Install the door lock striker spacer (2,4). (Front door sedan is shown in the diagram. Other doors are similar.)
2. Install the door lock striker (1).
3. Install the door lock striker bolts (3).
4. Snug the door lock striker bolts in order for the door lock striker to move.
5. Place the door outside handle in the closed position.
6. Push the door against the body in order to ensure that the door lock striker (1) allows a flush fit. (The coupe door is shown in the diagram. Other
doors are similar.)
Notice: Refer to Fastener Notice in Service Precautions.
