Alero L4-144 2.4L DOHC VIN T SFI (2000)
4. Connect the wheel cylinder to brake modulator brake pipes to the brake modulator.
^
Tighten the tube nuts to 24 Nm (18 ft. lbs.).
5. Connect the Brake Motor Pack electrical connector (1).
6. Connect the two brake solenoid valve electrical connectors (2).
7. Install the radiator inlet hose.
8. Install the Battery tray.
9. Install the Battery to Vehicle. Refer to Battery Replacement in Starting and Charging.
10. Bleed the brake system. Refer to Hydraulic Brake System Bleeding.
11. Perform the A Diagnostic System Check - ABS.
