Alero L4-144 2.4L DOHC VIN T SFI (2000)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Modulator Bracket Replacement
Removal Procedure
Caution: To help avoid personal injury, due to a retained load on the brake modulator, the Gear Tension Relief function of the scan tool
must be performed prior to removal of the ABS brake modulator/master cylinder assembly.
1. Remove the brake modulator assembly. Refer to Brake Modulator Assembly Replacement.
2. Remove the bracket mounting bolts.
3. Remove the bracket from the frame.
Installation Procedure
1. Install the bracket onto the frame.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bracket mounting bolts.
^
Tighten the bracket mounting bolts to 25 Nm (18 ft. lbs.).
3. Install the Hydraulic modulator assembly. Refer to Brake Modulator Assembly Replacement.