Alero L4-144 2.4L DOHC VIN T SFI (2000)
1. Install the bracket onto the frame.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bracket mounting bolts.
^
Tighten the bracket mounting bolts to 25 Nm (18 ft. lbs.).
3. Install the Hydraulic modulator assembly. Refer to Brake Modulator Assembly Replacement.
Brake Modulator Gear Replacement
Removal Procedure
Caution: To help avoid personal injury, due to a retained load on the brake modulator, the Gear Tension Relief function of the scan tool
must be performed prior to removal of the ABS brake modulator assembly.
Notice: Do not allow gear to turn while removing the retaining nut, since the modulator piston can hit the top of the modulator bore, damaging the
piston. Place a screwdriver through the holes in the gears (not between the gears) into the recessed hole in the modulator base. This will prevent the
gear from turning, aiding in gear removal.
Important: Do not repair damaged motor packs or brake modulators. Other than modulator drive gears replacement, repair of the motor pack and
brake modulator assemblies is not authorized. Do not oil or lubricate the gears on the motor pack.
1. Remove the Brake Modulator Assembly. Refer to Brake Modulator Assembly Replacement.
2. Remove the Torx(R) head screws (5) that attach the gear cover (4).
