Alero L4-144 2.4L DOHC VIN T SFI (2000)
^
Tools Required
-
J 36349 Front Dust Boot Seal Installer
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the bleeder valve (2) and the bleeder valve cap (1) to the caliper housing.
^
Tighten the bleeder valve to 11 Nm (97 inch lbs.).
2. Lubricate a new piston seal with clean brake fluid.
3. Install the piston seal into the caliper bore grooves. Ensure that the piston seal is not twisted.
4. Lubricate the piston boot with clean brake fluid.
5. Install the piston boot (1) onto the piston (2).
6. Lubricate the piston OD with clean brake fluid.