Alero L4-144 2.4L DOHC VIN T SFI (2000)
9. Remove the caliper mounting bolts. It may be necessary to use a wrench in order to hold the brake caliper pin from rotating.
10. Remove the caliper from the rotor and the caliper bracket.
11. Remove the two guide pins and the guide pin boots from the caliper bracket (1).
12. Inspect the guide pins and bores for corrosion.
13. Inspect the boots for cuts or nicks.
Important: Do not attempt to polish away corrosion.
14. If damage to the guide pin boots, the guide pins, or the bores are found, replace the damaged component with new parts when installing the
caliper.
Installation Procedure
