Alero L4-144 2.4L DOHC VIN T SFI (2000)
Tie Rod End: Service and Repair
Removal Procedure
Important: Use the J 24319-B in order to separate all the tie rod ends.
-
Tools Required
-
J24319-8 Universal Steering Linkage Puller
1. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Wheels,Tires and Alignments.
2. Remove the nut (5) from the outer tie rod ball stud (4).
3. Loosen the jam nut (2).
4. Use the J 24319-8 in order to remove the outer tie rod ball stud from the steering knuckle.
