Alero L4-144 2.4L DOHC VIN T SFI (2000)
9. Remove the caliper bolts.
10. Remove the caliper housing (15) from the caliper bracket (12).
11. Inspect the piston boot (8) for the following conditions:
^
Cuts
^
Tears
^
Deterioration
Replace the piston boots if damage exists. Refer to Brake Caliper Overhaul - Rear.
12. Inspect the caliper bracket boots (13,4) for the following conditions:
^
Cuts
^
Tears
^
Deterioration
Replace the caliper bracket boots if damage exists.
13. Inspect the caliper bolts (1, 3) for corrosion or damage. If corrosion is found, use new parts when installing the caliper. Do not attempt to polish
away corrosion.
Installation Procedure
