Alero L4-144 2.4L DOHC VIN T SFI (2000)
1. Install the caliper to the caliper bracket.
2. Lubricate the caliper bolts with GM P/N 18010908 silicone grease or equivalent. Do not lubricate the threads.
3. Lubricate the rubber boots in the caliper bracket with GM P/N 18010908 silicone grease or equivalent.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the caliper bolts. Ensure that the boot is securely in the groove of the caliper bolt.
^
Tighten the caliper bolts to 110 Nm (81 ft. lbs.).
5. Install new sealing washers (2) and the bolt to the brake hose inlet fitting.
6. Install the brake hose bolt and fitting to the caliper.
^
Tighten the brake hose bolt to 50 Nm (37 ft. lbs.).
7. Remove the wheel nuts securing the rotor to the hub.
8. Install the tire and wheel assembly. Align the index marks on the wheel and the hub.
