Alero L4-144 2.4L DOHC VIN T SFI (2000)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
ABS Motor Pack Replacement
Removal Procedure
1. Remove the Brake Modulator Assembly. Refer to Brake Modulator Assembly Replacement.
2. Remove the Torx(R) head screws (5) attaching the gear cover.
3. Remove the gear cover (4) from the Brake Motor pack (1).
4. Remove the Torx(R) head screws (6) that attach the Brake Motor Pack (1) to the Hydraulic Modulator (2).
Notice: Use care when handling the motor pack to avoid damaging the motor pack connector. Make sure brake fluid does not accidentally intrude
into the motor pack. Brake fluid in the motor pack may cause a premature failure of the motor pack.
Notice: Use care when handling the motor packs. Replace the motor packs if the motor packs are dropped or damaged during handling.
Important: If the disassembly of the modulator assembly was caused by an ABS hydraulic functional test that did not pass, the Automated ABS
brake motor pack Diagnosis Test should be performed. Refer to Scan Tool Diagnostics. The Automated ABS brake motor pack Diagnosis Test
isolates the motor pack or brake modulator.
Important: No repair of the motor pack is authorized. Replace as an assembly.
5. Remove the Brake Motor Pack (1) from the Hydraulic Modulator (2).
Installation Procedure
