Alero L4-144 2.4L DOHC VIN T SFI (2000)
4. Position the motor pack (1) onto the modulator, aligning the three motor pack gears with the modulator gears (3).
5. Install the motor pack to the modulator Tore' head screws (6).
^
Tighten the Torx(R) head screws to 5 Nm (44 inch lbs.).
6. Install the gear cover (4) onto the modulator with Torx(R) head screws (5).
^
Tighten the Torx(R) head screws to 4 Nm (36 inch lbs.).
7. Install the Brake Modulator assembly into the vehicle. Refer to Brake Modulator Assembly Replacement.
8. Perform the Motor Rehome Procedure.
9. Perform the A Diagnostic System Check - ABS.
