Alero L4-144 2.4L DOHC VIN T SFI (2000)
5. Connect the Brake Motor Pack electrical connector (1).
6. Connect the two brake solenoid valve electrical connectors (2).
7. Install the radiator inlet hose.
8. Install the Battery tray.
9. Install the Battery to Vehicle. Refer to Battery Replacement in Starting and Charging.
10. Bleed the brake system. Refer to Hydraulic Brake System Bleeding.
11. Perform the A Diagnostic System Check - ABS.
Brake Modulator Bracket Replacement
Removal Procedure
Caution: To help avoid personal injury, due to a retained load on the brake modulator, the Gear Tension Relief function of the scan tool
must be performed prior to removal of the ABS brake modulator/master cylinder assembly.
1. Remove the brake modulator assembly. Refer to Brake Modulator Assembly Replacement.
2. Remove the bracket mounting bolts.
3. Remove the bracket from the frame.
Installation Procedure
