Alero L4-144 2.4L DOHC VIN T SFI (2000)
1. Install the air bleed pipe to the coolant outlet housing.
2. Connect the surge tank inlet hose and clamp to the air bleed pipe.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the air bleed pipe and retaining nut to the exhaust manifold stud.
^
Tighten the nut to 42 Nm (31 ft. lbs.).
4. Install the pipe and the bolt to the cylinder block.
^
Tighten the bolt to 14 Nm (124 inch lbs.).
5. Refill the cooling system. Refer to Draining and Filling Cooling System.
6. Start the engine. After the engine reaches normal operating temperature, check for coolant leaks.