Alero L4-144 2.4L DOHC VIN T SFI (2000)
Radiator Hose: Service and Repair
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. When replacing the upper radiator hose, remove the battery and the battery tray.
3. Drain and recover the coolant. The coolant level must be below the hose which is to be removed. Refer to Draining and Filling Cooling System.
4. Disconnect the radiator inlet hose from the radiator and the engine coolant outlet.
5. Disconnect the engine inlet hose from the radiator, the coolant inlet pipe, and the surge tank.
Installation Procedure
Notice: Make sure the reference marks on the hoses and the radiator are lined up. A twist on the hose would place strain on the radiator fitting which
could cause the fitting to crack or break.
