Alero L4-144 2.4L DOHC VIN T SFI (2000)
5. Remove the vacuum line from the fuel pressure regulator and the fuel injector harness connector.
6. Remove the fuel line retaining clamp from the bracket on top of the intake camshaft housing.
7. Remove the retaining bolts which secure the fuel rail to the camshaft housing.
8. Remove the fuel rail from the cylinder head.
9. Cover the injector openings in the cylinder head.
10. Cover the injector nozzles.
11. Leave the fuel lines attached and position fuel rail aside (on top of the master cylinder)
12. Disconnect, but do NOT remove from the vehicle, the timing chain housing at the intake camshaft housing.
