Alero L4-144 2.4L DOHC VIN T SFI (2000)
Drive Belt Tensioner: Service and Repair
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the drive belt. Refer to Drive Belt Replacement.
3. Remove the generator assembly. Refer to Generator Replacement in Starting and Charging.
4. Remove the A/C compressor. Position the compressor to one side. Refer to Compressor Replacement in Heating and Air Conditioning.
5. Remove the tensioner.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the tensioner and the bolt.
^
Tighten the tensioner bolt to 54 Nm (40 ft. lbs.).
2. Install the A/C compressor. Refer to Compressor Replacement in Heating and Air Conditioning.
^
Tighten the bolts to 54 Nm (40 ft. lbs.).
3. Install the generator assembly. Refer to Generator Replacement in Starting and Charging.