Alero L4-144 2.4L DOHC VIN T SFI (2000)
Engine Mount: Service and Repair
Engine Mount Strut Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the right front splash shield.
4. Remove the engine mount strut bolts.
5. Remove the engine mount strut.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the engine mount strut.
2. Install the engine mount strut bolts.
^
Tighten the strut bolts to 100 Nm (74 ft. lbs.) + 90 degrees.
3. Install the right front splash shield.
4. Lower the vehicle.
5. Connect the negative battery cable.