Alero L4-144 2.4L DOHC VIN T SFI (2000)
1. Install the oil filter bypass valve. Seat the valve using a socket of the same diameter and a mallet.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the oil filter adapter.
^
Tighten the adapter to 29 Nm (21 ft. lbs.).
3. Set the gasket in place and install the filter. Turn the filter 3/4 - 1 complete turn after the gasket contacts the surface of the block.
4. Lower the vehicle.
5. Connect the negative battery cable.
6. Start the vehicle and test for leaks.