Alero L4-144 2.4L DOHC VIN T SFI (2000)
15. Disassemble the following components:
^
The rotator (intake)
^
The valve spring seat (exhaust)
16. Assemble the rotator (intake).
17. Assemble the valve spring seat (exhaust).
18. Install a new, clean and dry valve seal. Push the seal on by hand in order to seat the seal fully.
19. Install the spring and retainer. Use the J 36588, and the J 5892-D in order to compress the valve spring.
20. The valve keys
21. Inspect for proper valve key seating.
Installation Procedure
