Alero L4-144 2.4L DOHC VIN T SFI (2000)
10. Clean any lubricant that is present on the ignition coil and module assembly to the camshaft housing bolts.
11. Apply Pipe Sealant GM P/N 1052080 or equivalent onto the ignition coil and module assembly to the camshaft housing bolts.
12. Install the ignition coil and module assembly to the camshaft housing bolts.
^
Tighten the bolts to 15 Nm (11 ft. lbs.) +30 degrees.
13. Connect the electrical connector to the ignition coil and module assembly.
14. Connect the negative battery cable.