Alero L4-144 2.4L DOHC VIN T SFI (2000)
14. Remove the lower front cover bolts.
15. Lower the vehicle.
16. Remove the front cover and the gasket.
17. Inspect the front cover gasket. Replace a damaged gasket.
Installation Procedure
^
Tools Required
-
J 36660-A Torque Angle Meter
1. Install the front cover gasket. The gasket is reusable and does not require sealer.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the upper front cover bolts.
^
Tighten the fasteners to 12 Nm (106 inch lbs.).
3. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
4. Install the remaining front cover fasteners.
^
Tighten the fasteners to 12 Nm (106 inch lbs.).
