Alero L4-144 2.4L DOHC VIN T SFI (2000)
Control Assembly: Service and Repair
REMOVAL PROCEDURE
1. Remove the accessory trim panel.
2. Remove the control assembly screws.
3. Remove the control assembly from the accessory trim panel.
4. Disconnect the vacuum hose harness connector (1) from control assembly.
5. Disconnect the vacuum hose harness two hose connector (2) from the control assembly.
6. Disconnect the blower motor switch electrical connector (4) from the control assembly.
7. Disconnect the rear defroster control electrical connector (3) from the control assembly.
INSTALLATION PROCEDURE
1. Connect the vacuum hose harness connector (1) to control assembly.
2. Connect the vacuum hose harness two hose connector (2) to the control assembly. Secure the connector on the tab.
3. Connect the blower motor switch electrical connector (4) to the control assembly.
