Alero L4-144 2.4L DOHC VIN T SFI (2000)
1. Position the multifunction switch (1) on the steering column (2) while depressing the spring loaded horn pin.
2. Connect the electrical connectors to the multifunction switch (1).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the Torx(R) head screw (1) to the multifunction switch (2).
Tighten the screw to 4 Nm (35 inch lbs.).
4. Install the steering column trim cover. Refer to Steering Column Trim Cover Replacement - On Vehicle.
5. Enable the SIR system. Refer to Enabling the SIR System in Air Bag Systems.
6. Connect the negative battery cable.
7. Ensure that the multifunction switch functions properly
