Alero L4-144 2.4L DOHC VIN T SFI (2000)
Alignment: Specifications
Trim Height Specifications
Z
0
All measurements are taken with a full tank of fuel. The
measurements for D,J,K and Z all have -3/8 - +3/8 tolerance
D
4 27/32 in
J
9 21/64 in
K
9 39/64 in
Front Caster
Alignment Specifications
4.10 deg
Tolerance
3.10 - 5.10 deg
Front Camber
Alignment Specifications
-0.20 deg
Tolerance
-1.20 to +0.80 deg
Individual Toe
Alignment Specifications
0.05 deg
Measure the above Toe angles with the steering wheel at
level postion, visually aligned with column.
Tolerance
-0.07 to +0.17 deg
Sum Toe
Alignment Specifications
0.10 deg
Tolerance
-0.15 to +0.35 deg
Cross Camber
Alignment Specifications
0.00 deg
(Slight Cross Camber differences can be made when servicing
the vehicle for steering pull.)
Tolerance
-1.00 to +1.00 deg
Cross Caster
Alignment Specifications
0.00 deg
Tolerance
-1.00 to +1.00 deg
Rear Camber
Alignment Specifications
0.00 deg
Tolerance
-0.70 to +0.30 deg
Rear Sum Toe
Alignment Specifications
-0.20 deg
Tolerance
-0.26 to +0.14 deg
Rear Thrust Angle
Alignment Specifications
0.00 deg
Tolerance
-0.20 to +0.20 deg