oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Fuel Pump Pickup Filter > < A/T - PWM Filter Removal
Page 1
background image

Fuel Pressure Release: Service and Repair

CAUTION:  Refer to Vehicle Lifting Caution in Service Precautions.

1. Raise the vehicle.
2. Disconnect the fuel pump connector.
3. Lower the vehicle.
4. Start and run the engine until the fuel supply remaining in the fuel pipes is consumed. Engage the starter for 3 seconds in order to assure relief of

any remaining pressure.

5. Raise the vehicle.
6. Reconnect the fuel pump connector.
7. Lower the vehicle.
8. Disconnect the negative battery cable in order to avoid possible fuel discharge if an accidental attempt to start the engine is made.

Fuel Pump Pickup Filter > < A/T - PWM Filter Removal