Alero L4-144 2.4L DOHC VIN T SFI (2000)
1. Install the power steering pressure hose (3) to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the power steering pressure hose (3) to the power steering pump pipe (4).
Tighten the fitting to 27 Nm (20 ft. lbs.)
3. Install the upper air cleaner assembly. Refer to Air Cleaner Assembly Replacement.
4. Raise the vehicle on a hoist. Refer to Vehicle Lifting.
5. Install the power steering pressure hose (1) to the power steering gear (3).
Tighten the fitting to 27 Nm (20 ft. lbs.).
6. Lower the vehicle.
7. Bleed the power steering system. Refer to Bleeding Power Steering System.
