Alero L4-144 2.4L DOHC VIN T SFI (2000)
![background image](/oldsmobile/alero/l4-144_2.4l_dohc_vin_t_sfi/Page-1213003.png)
2. Close the PCM bracket latch.
NOTE: Do not touch the PCM connector pins or soldered components on the circuit board in order to prevent possible Electrostatic Discharge
(ESD) damage. Do not remove the integrated circuit boards from the carrier.
3. Install the PCM connectors.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Tighten the PCM connector screws (1).
Tighten
Tighten the screws to 8 N.m (71 lb in).
5. Install the sound insulator.