Alero L4-144 2.4L DOHC VIN T SFI (2000)
Positive Crankcase Ventilation: Service and Repair
REMOVAL PROCEDURE
1. Remove the air cleaner outlet resonator.
2. Remove the intake manifold.
3. Disconnect the oil/air separator vent hoses (1,4).
4. Remove the oil/air separator mounting bolts (2).
5. Remove the oil/air separator assembly (3).
INSTALLATION PROCEDURE
1. Install the oil/air separator assembly (3).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the oil/air separator mounting bolts (2).
Tighten
Tighten the bolts to 24 N.m (16 lb ft).
IMPORTANT: When installing the hoses, apply a small film of soap to the inside edges of the hose prior to installation.
3. Connect the oil/air separator vent hoses (1,4).
4. Install the intake manifold.
5. Connect the air cleaner outlet resonator.
