Alero L4-144 2.4L DOHC VIN T SFI (2000)
Throttle Body: Service and Repair
REMOVAL PROCEDURE
NOTE:
^
Do Not use solvent of any type when cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as damage to the gasket
surfaces and throttle body assembly may result.
Use care in cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as sharp tools may damage the gasket surfaces.
^
Do not use any solvent that contains Methyl Ethyl Ketone (MEK). This solvent may damage fuel system components.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the air cleaner outlet resonator.
3. Disconnect the Idle Air Control (IAC) valve sensor.
4. Disconnect the Throttle Position (TP) sensor.
5. Remove the vacuum hoses from the throttle body.