Alero L4-144 2.4L DOHC VIN T SFI (2000)
6. Remove the cruise control cable (1), if applicable.
7. Release the accelerator control cable lug (3) from the throttle body assembly.
8. Depress the tangs on the accelerator control cable (1) while pulling the accelerator control cable through the accelerator control cable bracket (4).
9. Remove the accelerator control cable out of the bracket.
10. Remove the cable from the vehicle.
INSTALLATION PROCEDURE
1. Route the accelerator control cable through the accelerator control cable bracket (4).
2. Press the accelerator control cable tabs (1) into the accelerator control bracket.Ensure the tangs expand and properly seat.
3. Install the control cable plug (3) to the throttle body cam.
4. Install the cruise control cable (1), if applicable.
