Alero L4-144 2.4L DOHC VIN T SFI (2000)
9. Disconnect the coil harness connector from the ICM.
IMPORTANT: When removing the housing from the cover, make sure the ground strap stays in place.
10. Remove the housing from the cover.
11. Remove the screws that retain the ICM to the cover.
12. Remove the ICM from the cover.
INSTALLATION PROCEDURE
IMPORTANT: DO NOT wipe grease from the module or coil if the same module is to be replaced. If a new module is to be installed, a package of
silicone grease will be included with the module. Spread the grease on the metal face of the module and on the cover where the module seats. This
grease is necessary for module cooling.
