Alero L4-144 2.4L DOHC VIN T SFI (2000)
8. Install the ICM assembly to the engine while carefully aligning the spark boots to the spark plug terminals.
IMPORTANT: The ICM cover bolts must be installed using isolator washers with the rubber side facing down.
9. Install the bolts that retain the ICM assembly to the camshaft housing after coating the bolt threads with LOCTITE, or equivalent.
Tighten
Tighten the bolts to 22 N.m (16 lb ft).
10. Connect the ICM 11 pin harness connector.
