Alero L4-144 2.4L DOHC VIN T SFI (2000)
Fuel Tank Pressure Sensor: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure. See: Fuel Delivery and Air Induction/Fuel Filter/Fuel Pressure
Release/Service and Repair
3. Drain the fuel tank. Refer to Fuel Tank Draining Procedure. See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Procedures
4. Remove the fuel tank.
5. Disconnect the fuel tank pressure sensor connector.
6. Remove the fuel tank pressure sensor from the modular fuel sender.
INSTALLATION PROCEDURE
1. Install the new fuel tank pressure sensor to the modular fuel sender.