Alero L4-144 2.4L DOHC VIN T SFI (2000)
12. Stake the other end of the retainer:
12.1. Remove the punch, part of J 41340.
12.2. Rotate the punch, part of J 41340 , 180 degrees.
12.3. Hold the punch, part of J 41340 , squarely against the end of the punch slot on J 41340.
12.4. Stake the metal over the other end of the retainer.
13. Loosen the holding screw.
14. Remove the cylinder from the J 41340.
15. Inspect that the retainer is properly staked. Restake as needed.
16. Lubricate the cylinder retainer slot.
17. Insert the following parts into the cylinder retainer slot:
-
The retainer spring (2)
-
The retainer (3)
18. Lubricate the cylinder retainer (3) with GM P/N 12345996 or equivalent as needed.
IMPORTANT: Use a paste type grease, not a spray, for the following step.
