Alero L4-144 2.4L DOHC VIN T SFI (2000)
1. Install the EBCM to vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the mounting screws attaching the EBCM to bracket.
^
Tighten the attaching screws to 11 Nm (97 inch lbs.)
3. Connect the EBCM harness to the bracket.
4. Connect the EBCM electrical connector.
5. Install the inner splash shield.
6. Install the left front tire and wheel assembly.
7. Perform the A Diagnostic System Check - ABS.