Alero L4-144 2.4L DOHC VIN T SFI (2000)
Child Seat Tether Attachment: Service and Repair
REMOVAL PROCEDURE
CAUTION: The seat belt assembly and/or bracket assembly must be replaced as a unit only. Do not substitute parts for any reason, or
personal injury could result.
IMPORTANT: Replace the anchor bracket if the anchor bracket is damaged.
1. Remove the bolts/screws (1).
2. Remove the anchor bracket (3).
INSTALLATION PROCEDURE
1. Connect the anchor bracket (3) to the anchor bracket mounting plate.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: DO NOT use a nut driver to tighten this hardware or the fastener will not be properly seated.
2. Install the bolts/screws (1).
Tighten the bolts/screws (1) until the bolts are fully seated. Do not strip the bolts.
