Alero L4-144 2.4L DOHC VIN T SFI (2000)
Intake Air Temperature (IAT) Sensor: Description and Operation
The Intake Air Temperature (IAT) sensor is a thermistor, a resistor which changes value based on the temperature of air entering the engine, similar to
the ECT sensor. A low temperature produces a high resistance of 100,000 ohms at -0°C (-40°F) while a high temperature causes low resistance of 70
ohms at 130°C (266°F). The PCM supplies a 5 volt signal to the IAT sensor through a resistor in the PCM and monitors the terminal voltage. The
voltage will be high when the intake air is cold, and low when the intake air is hot. By measuring the voltage, the PCM knows the intake air temperature.
This input is used in starting and running fuel control calculations.
A fault in the IAT sensor circuit should set either a DTC P0112 or DTC P0113.