oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Sensors and Switches - Wheels and Tires > < Steering Angle Sensor|Locations|Page 9119
Page 2
background image

1. Compress the lower bearing spring (3) to a length of 23-24 mm  between the lower bearing seat (4), the steering wheel speed sensor (2) and the

lower spring retainer (1).

2. Install the steering shaft seal (1) to the sensor retainer (2).
3. Install the sensor retainer (2) to the steering shaft assembly (3).
4. Install the steering column. Refer to Steering Column Replacement.
5. Perform A Diagnostic System Check - ABS in Brakes and Traction Control.

Sensors and Switches - Wheels and Tires > < Steering Angle Sensor|Locations|Page 9119