oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Steering Wheel Replacement|Page 9276 > < Steering Wheel - Revised Removal Procedure|Page 9273
Page 1
background image

Steering Wheel: Service and Repair
Steering Wheel Replacement

This article has been updated by TSB# 06-02-35-019 dated August 28,2006.

Removal Procedure 

-

Tools Required   

-

J 1859-A Steering Wheel Puller

-

J 42120 Steering Wheel Puller Legs 

Caution: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable. Caution: Refer to SIR Handling Caution in Service Precautions.
2. Disable the supplemental inflatable restraint (SIR) system. Refer to Disabling the SIR System in Air Bag Systems.
3. Remove the steering column trim covers. Refer to Steering Column Trim Cover Replacement - On Vehicle.
4. Remove the inflator module. Refer to Inflatable Restraint Steering Wheel Module Replacement in Air Bag Systems.

5. Remove the steering wheel nut (1).

Notice:   When removing the steering wheel, use only the specified steering wheel puller. Do not hammer on the end of the steering column shaft.
Hammering could loosen the plastic injections which maintain the steering column rigidity.

6. Remove the steering wheel using the J 1859-A and J 42120.
7. Disconnect the electrical connectors (4) from the column.

Steering Wheel Replacement|Page 9276 > < Steering Wheel - Revised Removal Procedure|Page 9273