Alero L4-144 2.4L DOHC VIN T SFI (2000)
1. Position the rear suspension support (7) on the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the rear suspension support mounting bolts (5, 8, 10 and 11).
Tighten the suspension support mounting bolts to 120 Nm (89 ft. lbs.).
3. Install the wheel speed sensor wiring harness to the rear support.
4. Install the bolt to the vapor canister.
5. Install the lateral links. Refer to Rear Lateral Links and Trailing Arms Replacement (Rear) and Rear Lateral Links and Trailing Arms Replacement
(Front).
6. Install the ABS electrical harness to the lateral links.
7. Connect the electrical connectors to the wheel speed sensors.
8. Install the stabilizer shaft. Refer to Stabilizer Shaft Replacement.
9. Install the parking brake cables to the rear support.
10. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
11. Lower the vehicle.
12. Measure the rear wheel alignment. Refer to Measuring Wheel Alignment (Front) or Measuring Wheel Alignment (Rear).
