Alero L4-144 2.4L DOHC VIN T SFI (2000)
3. Install the strut to knuckle nuts (3) and bolts (5). Hand tighten the nuts (3).
4. Install the stabilizer shaft link. Refer to Stabilizer Shaft Link Replacement.
5. Install the trailing arm (5) to knuckle bolt (2), washer (3), and bushing (4).
Tighten the bolt to 69 Nm (51 ft. lbs.).
6. Install the wheel hub assembly.
7. Connect the parking brake cable to the parking brake lever. Refer to Park Brake Cable Replacement in Brakes and Traction Control.
8. Install the brake rotor. Refer to Brake Rotor Replacement - Rear in Brakes and Traction Control.
9. Connect the wheel speed sensor harness.
Tighten the strut to knuckle bolts to 120 Nm (89 ft. lbs.).
10. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignments.
11. Lower the vehicle.
