Alero L4-144 2.4L DOHC VIN T SFI (2000)
1. Install the front lateral link (3) to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the front lateral link nut (8) and bolt (7) at the rear suspension support (1).
Tighten the rear link bolt to the suspension support 120 Nm (89 ft. lbs.).
3. Connect the ABS wire harness to the lateral link.
4. Install the link to knuckle bolt (1), washer (4) and the nut (5).
Tighten the link to knuckle bolt to 120 Nm (89 ft. lbs.).
5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
6. Lower the vehicle.
