Alero L4-144 2.4L DOHC VIN T SFI (2000)
1. Clean and inspect the oil pan for dents or damage. Dry the oil pan before installation.
2. Install the oil pan gasket. Use a new gasket if the sealing ribs are damaged.
3. Install the oil pan. Replace the bottom pan if damaged.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the oil pan attaching bolts.
Tighten
Tighten the bolts to 14 Nm (124 inch lbs.).
5. Lower the vehicle.
6. Check the pan for leaks. Refill the transmission to the proper level with DEXRON(R)-III. Refer to Fluid Capacity Specifications.
7. Recheck the fluid level. Refer to Transmission Fluid Checking Procedure.
8. Inspect the oil pan gasket for leaks.
