Alero L4-144 2.4L DOHC VIN T SFI (2000)
1. Install the eight low and the reverse band oil pipe assembly seals.
2. Install the low and the reverse band oil feed pipe assembly onto the transmission.
Notice: Refer to Fastener Notice in Service Precautions.
3. Hand start the bolts that attach the oil feed pipe assembly to the transmission.
Tighten
Tighten the bolts to 12 Nm (106 inch lbs.).
4. Install the transmission oil filter assembly. Refer to Oil Filter and Seal Replacement.
5. Install the transmission oil pan and gasket. Refer to Oil Filter and Seal Replacement.
6. Lower the vehicle.
7. Refill the transmission to the proper level.
8. Inspect the transmission oil level. Refer to Transmission Fluid Checking Procedure.
