Alero L4-144 2.4L DOHC VIN T SFI (2000)
4. Install the master cylinder retaining nuts at the front of the dash.
Tighten
Tighten the nuts evenly to 21 Nm (15 ft. lbs.).
5. Install the pushrod to the clutch pedal.
6. Adjust the cruise control clutch switch, if equipped. Refer to Cruise Control Cable Adjustment in Cruise Control.
7. Install the sound insulator. Refer to Insulator Replacement - IP (Right) or Insulator Replacement - IP (Left) in Instrument Panel, Gauges and
Warning Indicators.
8. Bleed the hydraulic system. Refer to Hydraulic Clutch Bleeding.
